Mr. Heater Natural Gas Unit Heater 80,000 BTU/Hr. MHU80NG

You looking to find the "Mr. Heater Natural Gas Unit Heater 80,000 BTU/Hr. MHU80NG" Good news! You can purchase Mr. Heater Natural Gas Unit Heater 80,000 BTU/Hr. MHU80NG with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $689.99    

Product Feature

• Heats up to 1000 square feet
• Spark ignition features self-diagnostic control module
• Includes angle brackets (2) for easy install ceiling mount
• 4 inch flue size
• 1/2 inch gas connection

Product Description

Mr. Heater MHU80NG indirect fired unit heater can turn your garage or barn into a heated work space that is usable 12 month per year. This unit uses a built-in electric high-velocity fan to pull cool air into the rear of the heater and over a heat exchanger, forcing hot air into the surrounding area. Unit heater requires 115 volt AC power and can operate using natural gas (NG). Proper venting and a thermostat are required and are sold separately.

Mr. Heater Natural Gas Unit Heater 80,000 BTU/Hr. MHU80NG Review

I have a 30x40x14 Garage, live in a cooler climate (Wyoming). I have used this heater for 3 months and it is very impressive considering the cost of the unit .This Heater works very well . Has been set at 60 degrees and with the help of a ceiling fan placed in the center of the garage even the floor is warm . The cost of running makes the unit look very efficient . Estimating 10$ in electricity and 40$ in natural Gas. In January with the temps mostly in the negatives. The Garage has R38 ceiling and R19 walls. 5 4'x4' Windows and a 16x12 R9 Door. I am very impressed with this unit would recommend and purchase again !!!

Most of the consumer Reviews tell that the "Mr. Heater Natural Gas Unit Heater 80,000 BTU/Hr. MHU80NG" are high quality item. You can read each testimony from consumers to find out cons and pros from Mr. Heater Natural Gas Unit Heater 80,000 BTU/Hr. MHU80NG ...

KOHLER K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, White

You looking to find the "KOHLER K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, White" Good news! You can purchase KOHLER K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, White with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $807.56    

Product Feature

• 60-Inch by 32-Inch by 17-Inch install footprint
• Curved integral apron bows to 38-Inch at the center
• Integral tile flange
• Constructed of Acrylic
• Textured bottom surface

Product Description

Kohler K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, WhiteThe Expanse Curved Apron Bath has a contemporary design that coordinates with a variety of bathroom fixtures. The curve of the apron matches a bowed shower rod and increases the bathing space.Kohler K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, White Features: 60 Inch (152.4 cm) x 32 Inch (81.3 cm) x 17 Inch (43.2 cm) Curved integral apron bows to 38" at the center Integral tile flange Constructed of Acrylic Textured bottom surface 60 gallon (227.1 L) capacity Install footprint: 38 Inch (96.5 cm) width at center of apron One year limited Kohler warranty

KOHLER K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, White Review

Just got it put in yesterday. Have not used it yet but the tub was easy to install and looks wonderful. The curve is not overly pronounced but adds a ton of room to the tub.

Most of the consumer Reviews tell that the "KOHLER K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, White" are high quality item. You can read each testimony from consumers to find out cons and pros from KOHLER K-1100-RA-0 Expanse Curved Integral Apron Bath with Right-Hand Drain, White ...

Rheem RTE 18 Electric Tankless Water Heater, 5 GPM

You looking to find the "Rheem RTE 18 Electric Tankless Water Heater, 5 GPM" Good news! You can purchase Rheem RTE 18 Electric Tankless Water Heater, 5 GPM with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $399.99    

Product Feature

• On-unit temperature control
• LEDs indicate active element and standby mode
• Standard 1/2" water connection
• Rugged brass/copper heat exchanger
• Modulating power

Product Description

Ideal for Point-of-Use Applications Continuous Hot Water on Demand Energy Efficient Compact Design - Fits Almost Anywhere On-Unit Temperature Control LEDs Indicate Active Element and Standby Mode Standard 1/2" Water Connection Rugged Brass/Copper Heat Exchanger Applications Homes Apartments Condos Hospitals Hotels Boats Restaurants Offices Laboratories ...anywhere hot water is needed! Model: RTE 18 Length: 10-1/2 Width: 11-1/4 Weight: 12 ELECTRICAL SPECIFICATIONS KW: 18 VOLTS: 240 REQ.Breaker: (2)40 MAX POWER(AMP): 75 AWG WIRE: (2)8 Minimum Activation Flow rate(GPM): 0.4 Maximum Flow Rate(GPM): 5

Rheem RTE 18 Electric Tankless Water Heater, 5 GPM Review

First, the wiring info on the package is wrong, on all the Rheem boxes, so, the 1st one I ordered, the RTE 18, seemed to be defective, as well as this smaller one. Once I found that the wiring called for TWICE the amperage than was listed I finally got hot water. That was a rigamorole hopefully no-one else goes through if they read this.

My complaint with it has more to do with my choice at this point, and the misleading GPM. The 18 had 4 heater elements in it and was listed as a 5 GPM unit. This 13 is listed as a 2.8 and has 2 elements, do the math yourself there. It does not provide a hot shower out of a 2.5 GPM faucet. I wish I had kept the bigger one as it is more in line with powering my PUNY apartment. The 5 GPM would've been adequate enough to allow a sink to run along with a shower and still get hot.

This one, is really for a point of use application, I am having to go to a 1.75 GPM outlet on my shower to compensate for this one. In the end I'll save a bunch on the electric bill and conserve a bunch of water. Yay for the planet, not so great for my thirst for a great shower.

IF the unit last's, however, my overall satisfaction will be great after the mental adjustment. The HUGE thing you have to factor in the cost of going tankless electric is the Water Softener you MUST add to this in most environments with HARD WATER. Hard water will ruin these units faster than you can shake a stick if you don't put a softener in line ahead of it. The heat activates the calcium and will stick to the internal heating elements and break it if not. That is a big expense that the manufacturer doesn't care to stress to you. Of course, the benefits of soft water are very nice also. Luckily, I was able to find a good used softener. There is a LOT more than meets the eye with these, no matter who makes them. This Rheem, internally, doesn't seem to be anything special, but, then again, they may make the cheapest unit despite having the Rheem name. The markdown is about right in terms of value, whereas the other manufactures are WAY overpriced IMO. Get a bigger unit than you think you need and put a softener in line, a real one, no an electronic gizmo, it needs to be a salt using system, don't ask why, just do it.

Most of the consumer Reviews tell that the "Rheem RTE 18 Electric Tankless Water Heater, 5 GPM" are high quality item. You can read each testimony from consumers to find out cons and pros from Rheem RTE 18 Electric Tankless Water Heater, 5 GPM ...

Ingersoll-Rand SS3F2-GM Garage Mate 15 Amp 2 Horsepower 30 Gallon Oiled Wheeled Single Hot Dog Compressor

You looking to find the "Ingersoll-Rand SS3F2-GM Garage Mate 15 Amp 2 Horsepower 30 Gallon Oiled Wheeled Single Hot Dog Compressor" Good news! You can purchase Ingersoll-Rand SS3F2-GM Garage Mate 15 Amp 2 Horsepower 30 Gallon Oiled Wheeled Single Hot Dog Compressor with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $729.99    

Product Feature

• 100% continuous duty for tough applications
• Durable cast iron construction
• 30 gallon horizontal tank
• 5.7 acfm at 90 psi
• Equiped with wheels for easy transport

Product Description

Designed for professionals and serious do-it-yourselfers, the versatile Garage Mate is ideal for the home, shop or job site. Delivering maximum air, the Garage Mate can power impact guns, ratchets, grinders, drills, nailers, paint sprayers, sanders and more. The Garage Mate features a cast-iron, oil-lubricated pump for solid, reliable performance. Warranty on the pump extends to 2 years with the use of start-up kit, Item# 15920083 (sold separately). Air Outlet Size (in.): 3/8, Volts: 115, Stage: Single, Dimensions L x W x H (in.): 46 1/4 x 25 5/16 x 35 5/16, Motor Phase(s): Single, Pump: Cast iron, splash-lubricated, Duty Cycle: 100%, Tank Type: Horizontal, Portable or Stationary: Portable, CFM at 90 PSI: 5.2, Amps: 16, HP: 2, Max. PSI: 135, Air Tank Size (gal.): 30, Drain System: Manual, Drive: Belt

Ingersoll-Rand SS3F2-GM Garage Mate 15 Amp 2 Horsepower 30 Gallon Oiled Wheeled Single Hot Dog Compressor Review

I had an old Rand 4000 air compressor that was recalled (1986 model). As part of their recall program they let me choose from a number of different air compressors at a discounted price. I chose the SS3F2, 2hp 30 gallon Garage Mate since it is almost identical to my old Rand 4000. So far I'm very happy with this compressor. The first thing I was shocked about is how quiet it is. You can still listen to the radio while this thing is running! Also, with the 30 gallon tank, it has to run less anyway. Make sure you also buy the start up kit because when I got my compressor it did not have oil in it yet (or even include any). I found the start up kit for $24.95 online and it comes with 2x 0.5L bottles of oil and 2 air filters. The pump only holds 0.5L of oil so you have a full bottle left over for a future change. The start up kit also extends your factory warranty by 2 years. I highly recommend this air compressor and Ingersoll Rand products!

Most of the consumer Reviews tell that the "Ingersoll-Rand SS3F2-GM Garage Mate 15 Amp 2 Horsepower 30 Gallon Oiled Wheeled Single Hot Dog Compressor" are high quality item. You can read each testimony from consumers to find out cons and pros from Ingersoll-Rand SS3F2-GM Garage Mate 15 Amp 2 Horsepower 30 Gallon Oiled Wheeled Single Hot Dog Compressor ...

Hitachi 939971 1-Tooth per Inch 3-Inch Hardened Tip Wood Cutting Band Saw Blade

You looking to find the "Hitachi 939971 1-Tooth per Inch 3-Inch Hardened Tip Wood Cutting Band Saw Blade" Good news! You can purchase Hitachi 939971 1-Tooth per Inch 3-Inch Hardened Tip Wood Cutting Band Saw Blade with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $204.03    

Product Feature

• Cuts through a variety of woods
• Made of high quality material
• Compatible with band saws
• 1-tooth per Inch (hardened tips)
• Comes with a 30-day limited warranty

Product Description

Hitachi 939971 3-Inch Hardened Tip Wood Cutting Band Saw Blade

Hitachi 939971 1-Tooth per Inch 3-Inch Hardened Tip Wood Cutting Band Saw Blade Review

After many years of turning good wood into sawdust I bought the Hitachi CB75F with 3" wide stellite tip blade. Never looked back. This thing saves time and money for me in the Guitar building world. Not many machines can deep cut 10" deep Australian Blackwood into accurate wafers hr on end without runout or waver. This one does. You gotta keep the teeth razor sharp though and let the saw do the work. I now sharpen the blades myself- after dissapointment sending to 'experts' in Sydney. I'm getting about 15 sharpens per blade. Caution- small blades (less than 3" wide) not a good idea on this saw as the can chew the rubber wheels out.

Most of the consumer Reviews tell that the "Hitachi 939971 1-Tooth per Inch 3-Inch Hardened Tip Wood Cutting Band Saw Blade" are high quality item. You can read each testimony from consumers to find out cons and pros from Hitachi 939971 1-Tooth per Inch 3-Inch Hardened Tip Wood Cutting Band Saw Blade ...

QTY 12 / Cree Ecosmart LED 4 " Recessed Light 9.5w 35,000 Hours 2700k

You looking to find the "QTY 12 / Cree Ecosmart LED 4 " Recessed Light 9.5w 35,000 Hours 2700k" Good news! You can purchase QTY 12 / Cree Ecosmart LED 4 " Recessed Light 9.5w 35,000 Hours 2700k with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $447.66    

Product Feature

• EcoSmart 4 in. 9.5-Watt (65 W) LED Downlight(E)*
• Model # ECO4-575L, 524-405
• 65 watt equivalent bulb
• brightness 575 Lumens
• warrenty: mfr 3 year warranty

Product Description

The EcoSmart 4 in. 9.5-Watt (65W) LED Down light Light Bulb (E)* produces 575 lumens with 9.5 watts of power and can last for up to 35,000 hours. The LED bulb features Cree TrueWhite technology for efficiency and color accuracy and can be used to replace a standard 65-watt bulb. (E)* means this bulb meets Federal minimum efficiency standards. Brightness: 575 Lumens Estimated Yearly Energy Cost: $1.14 (Based on 3 hrs/day, $0.11/kWh. Costs depend on rates and use.) Life: 32.0 years (Based on 3 hrs/day) Light Appearance: 2700K (soft white) Energy Used: 9.5 watts (equivalent to a 65 watt standard incandescent light bulb) Lumens per Watt: 61 Contains Mercury: No Uses 85% less energy compared to a standard incandescent light bulb Recessed ceiling light and suitable for use in dry, damp or wet locations Integrated LED light source and trim, for 6in recessed housings Dimmable: Yes Meets Federal minimum efficiency standards for Energy Star rating Powered by CREE TrueWhite Technology, for superior color quality and efficacy MFG Brand Name : EcoSmart MFG Model # : ECO-575L MFG Part # : ECO-575L Actual Color Temperature (K) : 2700 K Assembled Depth (in.) : 7.5 in Assembled Height (in.) : 7 in Assembled Width (in.) : 7.5 in Average Life (hours) : 35000 Bulb Diameter (In.) : 7.5 Bulb Length (In.) : 5 Commercial/Residential : Commercial/Residential Dimmable : Yes Energy Star Compliant : Yes Indoor/Outdoor : Indoor/Outdoor Item Package Type : Plastic Container Light Bulb Base Type : Medium Light Output (lumens) : 575 lm Manufacturer Warranty : 3 year limited warranty

QTY 12 / Cree Ecosmart LED 4 " Recessed Light 9.5w 35,000 Hours 2700k Review

I put 6 of these in my bedroom when doing a remodel, and had ordered 12, so I could add more if needed.
The room is 16'X16' and I put 3 of them spaced about 3.5 feet apart 20 inches from the wall down the sides of 2 walls.. PLENTY of light for the whole room. Puts out a GREAT warm Incandescent light glow when at full intensity.. When dimmed, they go a bit white in the color for my taste. Tempting to knock a star off for that actually. But, by far the best quality color of LED I have seen. Better than Halo, and a few other that the Home Depot, Lowes, Lamps Plus carried.
I'm amazed that I have a bright room for about 50 watts of power use. The price point is still a killer.
I also purchased some generic recessed can boxes to put these in that were made for another brand LED. They were only $9 each for new construction style. I just chopped off the plug on those, and chopped off the screw in bulb adaptor that these come with, and wire nutted them together. A good value at a total of $40 per hole for 4" LED can lights.
Zero noise when dimming, and dim down to a very low level before knocking out.
I LOVE the retention tabs they use for holding in the can too.. 3 tabs that stick out.. you just press it in to the hole. To remove, you twist counterclockwise and the tabs actually fold/retract and it falls out, rather than prying/dragging them out. Brilliant! Well designed product.. We'll have to see how long they actually last.

Most of the consumer Reviews tell that the "QTY 12 / Cree Ecosmart LED 4 " Recessed Light 9.5w 35,000 Hours 2700k" are high quality item. You can read each testimony from consumers to find out cons and pros from QTY 12 / Cree Ecosmart LED 4 " Recessed Light 9.5w 35,000 Hours 2700k ...

BOSTITCH 650S4-1 1-to-2-1/2-Inch 16-Gauge Medium Crown Stapler

You looking to find the "BOSTITCH 650S4-1 1-to-2-1/2-Inch 16-Gauge Medium Crown Stapler" Good news! You can purchase BOSTITCH 650S4-1 1-to-2-1/2-Inch 16-Gauge Medium Crown Stapler with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $399.00    

Product Feature

• 1- to 2-Inch 16-gauge medium crown stapler
• 340 in./lbs. of driving power; depth adjustment; jam-free magazine
• Molded rubber comfort grip designed to last longer; magazine holds 160 staples
• Tool-free 360-Degree exhaust port; narrow nose for better visibility
• 10.69 by 14.31-Inch; 4-1/2-Pound; 7-year warranty

Product Description

Crown staplers fasten a wide variety of materials and workpieces, from furniture frames to pallets, to crating material, even roof sheathing. That's why Bostitch designed this 16-gauge stapler with plenty of power to penetrate harder woods as well as precision depth control for concealing staples in furniture.A powerful tool, the stapler's 340 inch-pounds of driving oomph easily shoots nails up to 2 inches long into hard furniture frames and thick cedar shingles. The handy depth adjustment means there's no splitting when working with softer, thinner materials like pine pallets and crates. Not enough can be said about the depth adjustment, which is a joy to use, and is versatile enough to fine-tune a wide variety of applications. The stapler drives 16-gauge, 1- to 2-inch-long staples with medium-size ( -inch) crowns (staples that work great for roof decking, fence construction, sheathing, even irregular cedar shingle work). And, weighing just 4-1/2 pounds, the tool won't tear off your wrist during all-day stapling projects--even in awkward positions.The tool's jam-free magazine means no more cleaning bent staples out of the nose--otherwise a real hassle when you're on scaffolding or up high on a steep roof. A narrow nose enhances visibility and accuracy--a boon for working in tight quarters where there's no room to angle your head to the left or right. The stapler's exhaust port rotates 360 degrees with one finger, so you can redirect discharge on the fly and staple your way up one side of a corner, for example, and then down the other without having to hold the tool at a funky angle. For optimal comfort and control, the handle features a molded rubber grip. The purchase is covered by a Bostitch 7-year warranty. What's in the Box

BOSTITCH 650S4-1 1-to-2-1/2-Inch 16-Gauge Medium Crown Stapler Review

I bought this fine stapler at H.D. about 1.5 years ago from their rental dept. They had never rented it, I was told. I paid about $210 for a like new stapler. I bought some 2" staples here at AMAZON, a great deal with the free shipping. Overall, I love this stapler for construction projects that do not require a finished surface.

Pros:

- Will drive a 2" staple. I believe the 7/16" crown staplers only drive a 1.75" staple.

- 16 gauge fasteners are thicker than 15 gauge, thus stronger.

- The staples have a lot of holding power

- The sequential trip makes for quick work

- Power (see con) is more than adequate for pine, plywood, etc.

- Staples do not split the wood as fast as a thicker nail

- Staples do not penetrate past the surface as a nail will

- Staples do not pull thru the wood if the wood pieces are seperated as a nail will.

Cons:

- Hard to find staples

- Power (see pro) is less than adequate for hickory. I had to use the 15 ga finish nailer set to max pressure 110psi. I am using my whimpy compressor so I do not get effective or lasting pressure. My big compressor is not hooked up yet.

Most of the consumer Reviews tell that the "BOSTITCH 650S4-1 1-to-2-1/2-Inch 16-Gauge Medium Crown Stapler" are high quality item. You can read each testimony from consumers to find out cons and pros from BOSTITCH 650S4-1 1-to-2-1/2-Inch 16-Gauge Medium Crown Stapler ...