Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001" Accuracy, 0.001" Resolution

You looking to find the "Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001" Accuracy, 0.001" Resolution" Good news! You can purchase Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001" Accuracy, 0.001" Resolution with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $271.49    

Product Feature

• Precise dial graduations of 0.001", with one revolution equivalent to 0.100"
• Thumb-operated fine adjustment roll for one-handed use
• Lock screw holds the sliding jaw in position, to ensure a consistent measurement
• Rack teeth point down to keep foreign matter from clogging the gear
• Knife-edge contacts for inside and outside measurements

Product Description

The Starrett dial caliper has sharp black graduations every 0.100" on the no-glare, satin-finished stainless steel bar, and graduations on the dial every 0.001". One full revolution of the dial is equivalent to 0.100". These calipers have knife-edge contacts for measuring both inside dimensions (ID) and outside dimensions (OD). The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all.

The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive split gear anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls, which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; split gear systems actually split the gear into two gears, each half as thick as the original gear. One of these gears is then fixed to the shaft while the other gear is allowed to turn. The free-turning gear is connected to coil springs that rotate it until all of the backlash in the control system has been eliminated. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation.

Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units.

The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

</div></p>

Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001" Accuracy, 0.001" Resolution Review

If you don't want to spring the $600 for the Vernier model, this is your second-best choice. I tested it against my Starrett 123EMZ-6 using various carbide blocks and consistently it read accurately to with in .001". The only drawback to this type vs the Vernier is that it's graduated in either only Standard or Metric scale. The build quality is amazing, and an order of magnitude better than my old Chinese made $35 dial caliper. Worth the investment.

Most of the consumer Reviews tell that the "Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001" Accuracy, 0.001" Resolution" are high quality item. You can read each testimony from consumers to find out cons and pros from Starrett 120A-9 Dial Caliper, Stainless Steel, White Face, 0-9" Range, +/-0.001" Accuracy, 0.001" Resolution ...

SDT 7090i 2" Pipe Threader Threading Machine fits RIDGID � 811A Dies 300 Ridgid

You looking to find the "SDT 7090i 2" Pipe Threader Threading Machine fits RIDGID ® 811A Dies 300 Ridgid" Good news! You can purchase SDT 7090i 2" Pipe Threader Threading Machine fits RIDGID ® 811A Dies 300 Ridgid with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,249.99    

Product Feature

• SDT-811a 1/2" - 2" inch die head that is Ridgid Interchangable and fits Ridgid Dies
• Maximum Chuck Capacity is 2-1/2 inches
• Pentangular 5 Blade Conical Reamer
• Maximum amperage under load is 18.5 amps
• 40 Turns per minute for high quality threads

Product Description

What makes the SDT-7090i a Great Value to You?

• Our Pipe Threading Machine includes two sets of HSS Steel Dies that work RIDGID � Dies. These dies last 4 times longer than standard alloy steel dies.
• Our machine is equipped with a removable Heavy Duty Foot Pedal. Free your hands up and work smarter with this removable foot pedal.
• The SDT 7090i has a durable foldable steel cart with wheels. Easily move your machine around a job site, factory, truck, and shop as this cart easily folds up and down.
• Our machine has a CE / UL Approval. No need to worry about testing as the government has testified that this machine exceeds all CE and UL requirements.
• Fits RIDGID 811a Die Head and Dies

Features:

• Range of work is 1/2" inch to 2" inch NPT (National Pipe Thread)
• Automatic Oiling System produces reliable high quality threads. Oil is pumped with a gear driven pump and automatically recirculated through the system.
• 1/2 HP Universal Electric 115 volt 60 HZ Reversible Motor 38 RPM
• Industrial strength 0-2" inch pipe cutter
• SDT-811a 1/2" - 2" inch die head that works with RIDGID ® Dies
• Dies are made of Steel with Rockwell Hardness of 58-62 HRC for long life.
• Maximum Chuck Capacity is 2-1/2 inches
• Pentangular 5 Blade Conical Reamer
• Maximum amperage under load is 18.5 amps
• 40 Turns per minute for high quality threads

Includes:

• SDT 1/2"-2" Universal 811a Die Head works with RIDGID �
• 1 set of 1/2"-3/4" HSS NPT Dies
• 1 set of 1"-2" HSS NPT Dies
• Heavy Duty Removable Foot Pedal
• Industrial Strength Pipe Cutter
• Heavy Duty Portable Cart Stand with 10" Wheels
• **Sorry Threading Oil Not Included**
  

</p>

SDT 7090i 2" Pipe Threader Threading Machine fits RIDGID ® 811A Dies 300 Ridgid Review

I rated this a 3 due to build quality and initial setup. Unit works, but sprays oil all over. I have had problems setting the thread depth, the factory points were useless. Foot pedal is a nice feature, but not needed with the quick release on the dies. unit is light enough to roll are on the job site, and the stand is built like a tank. If you buy this and plan on transporting, make sure you install a valve in the drain hole to remove all the oil or you will be in for a fun time cleaning. This may sound like a negative review, but the threader does work well once set up and I am mostly happy with it.

Most of the consumer Reviews tell that the "SDT 7090i 2" Pipe Threader Threading Machine fits RIDGID � 811A Dies 300 Ridgid" are high quality item. You can read each testimony from consumers to find out cons and pros from SDT 7090i 2" Pipe Threader Threading Machine fits RIDGID ® 811A Dies 300 Ridgid ...

Air Supply Cyclone Liner-Vac 3.0 HP 120V

You looking to find the "Air Supply Cyclone Liner-Vac 3.0 HP 120V" Good news! You can purchase Air Supply Cyclone Liner-Vac 3.0 HP 120V with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $331.94 $324.00   

Product Feature

• Motor cover plate can be easily removed to replace brushes or to service motor
• 20amp toggle switch with toggle boot
• 2 inch standard N.P.T. threaded inlet with filter screen to protect motor
• 1.5 inch hose adapter on outlet can be easily adapted to a variety of fittings
• Powerful 3.0hp 120volt three-stage bypass motor/produces 130efm open flow of sealed pressure

Product Description

Winterize your pool plumbing like a pro! Used by swimming pool professionals to blow out plumbing lines. In addition to blowing out pool lines, it also is used as a powerful vacuum for setting new vinyl liners. Connect to your skimmer line, and blow air - from one location - through all pipes and equipment. While the return lines are bubbling in the pool, simply plug them tight with winter expansion plugs. The swimming pool plumbing line blower can save you the expense of paying for pool winterization. Rest easy this winter, knowing that you have "blown out your lines" like the professionals.

Air Supply Cyclone Liner-Vac 3.0 HP 120V Review

This blower worked well. Was able to blow the pool
Lines with ease. The only thing that held me from giving
A higher rating is the hose attachment. For the price of the blower,
they could have added a hose.

Most of the consumer Reviews tell that the "Air Supply Cyclone Liner-Vac 3.0 HP 120V" are high quality item. You can read each testimony from consumers to find out cons and pros from Air Supply Cyclone Liner-Vac 3.0 HP 120V ...

Johnson Level and Tool 40-6516 Self-Leveling Rotary Laser Level

You looking to find the "Johnson Level and Tool 40-6516 Self-Leveling Rotary Laser Level" Good news! You can purchase Johnson Level and Tool 40-6516 Self-Leveling Rotary Laser Level with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $410.93 $399.99   

Product Feature

• Locking mechanism protects inner pendulum during transportation
• Self-leveling in the horizontal plane
• Manual-leveling in the vertical plane with 90 split beam with illuminated vertical vial
• Visual and audible alarms when beyond leveling range
• Laser rotates at 200, 400, 600 RPM

Product Description

The Rotary Laser Level features self-leveling in the horizontal plane and manual-leveling in the vertical plane with 90deg split beam. Illuminated vertical vial. Visual and audible alarms when beyond leveling range. Laser Wavelength: 635nm� 10nm, Single, Pair, or Set: Set, Battery Type: AA, Rotation Speed: 200, 400, 600 rpm Variable, Case Type: Hard shell case, Battery Included: Yes (4), Battery Life: Up to 24 hrs. of continuous use, Laser Beam Color: Red, Exterior Range (ft.): Up to 800, Class Rating: Class Iliac, Accuracy: � 1/8in./50ft, Tripod Mount Dimensions (in.): 5/8in.-11 center screw thread, Dimensions L x W x H (in.): 4 31/32 x 6 11/16 x 6 11/16, IP Protection Class: 54, Visual or Audible Indicator: Both, Indicator Type: Visual, audible, Vertical Leveling: Yes, Self Leveling Range: 3deg , Beam Type: 90deg split beam, Interior Range (ft.): Up to 200, Horizontal Leveling: Yes, Leveling Type: Self (pendulum), Working Temperature: 14deg F to 113deg F, Laser Output: <=5mW.

Johnson Level and Tool 40-6516 Self-Leveling Rotary Laser Level Review

This tool works well, And is hard to beat at this price point. The first one I received was out of calibration and could not be adjusted. I sent it back after calling and received another one quickly and had no problem with this one.

Most of the consumer Reviews tell that the "Johnson Level and Tool 40-6516 Self-Leveling Rotary Laser Level" are high quality item. You can read each testimony from consumers to find out cons and pros from Johnson Level and Tool 40-6516 Self-Leveling Rotary Laser Level ...

Moen 6111BN Level One-Handlelow Arc Vessel Bathroom Faucet, Brushed Nickel

You looking to find the "Moen 6111BN Level One-Handlelow Arc Vessel Bathroom Faucet, Brushed Nickel" Good news! You can purchase Moen 6111BN Level One-Handlelow Arc Vessel Bathroom Faucet, Brushed Nickel with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $361.16 $343.43   

Product Feature

• Brushed nickel finish provides a lightly brushed warm grey metallic look
• Low-arc spout design for conventional styling
• One-Handle lever design for ease of use
• LifeShine finish guaranteed not to tarnish, corrode or flake off
• ADA compliant

Product Description

Moen 6111BN Level 1 Handle dl Lav Vessel 1 Handle Bn Brushed Nickel brushed nickel finish provides a lightly brushed warm grey metallic look low-arc spout design for conventional styling one-handle lever design for ease of use LifeShine(R) finish guaranteed not to tarnish, corrode or flake off single hole mount ADA compliant laminar stream allows for clear and quiet water flow meets WaterSense criteria to conserve water without sacrificing performance limited lifetime warranty

Moen 6111BN Level One-Handlelow Arc Vessel Bathroom Faucet, Brushed Nickel Review

Absolutely gorgeous. Searched high and low for a well made single valve faucet for a vessel sink. Great price (best price for the Moen 6111) and fast delivery. I will be ordering two additional faucets for the master bathroom.

Most of the consumer Reviews tell that the "Moen 6111BN Level One-Handlelow Arc Vessel Bathroom Faucet, Brushed Nickel" are high quality item. You can read each testimony from consumers to find out cons and pros from Moen 6111BN Level One-Handlelow Arc Vessel Bathroom Faucet, Brushed Nickel ...

Spectra LL300-3 Laser Level Package with System Case

You looking to find the "Spectra LL300-3 Laser Level Package with System Case" Good news! You can purchase Spectra LL300-3 Laser Level Package with System Case with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $779.99 Too low to display   

Product Feature

• Complete leveling crew in a case, laser, tripod, HL450 laserometer and clamp, grade rod and alkaline batteries in a portable hard shelled carrying case
• Easy to transport, easy to carry, easy to store durable adjustable leg tripod with quick release clamps aluminum
• Laser stops rotating if its elevation changes to avoid erroneous readings
• Removable rotor cage, rotor cage can be removed for precise 360-degree coverage
• Highly rugged design withstands a direct drop up to 3-feet (1-meter) onto concrete

Product Description

Includes Rotary Laser - LL300, Laserometer/Receiver - HL450, 3 Meter Grade Rod - GR153, Rod Clamp, Aluminum Tripod - Q104025, (4) D Alkaline Batteries, Case

Spectra LL300-3 Laser Level Package with System Case Review

Again stick is in metric not inches , our people require inch sticks so that means, i need a stick the same lenght as the ones that came with them

Most of the consumer Reviews tell that the "Spectra LL300-3 Laser Level Package with System Case" are high quality item. You can read each testimony from consumers to find out cons and pros from Spectra LL300-3 Laser Level Package with System Case ...