DEWALT DW735 13-Inch, Two Speed Thickness Planer

You looking to find the "DEWALT DW735 13-Inch, Two Speed Thickness Planer" Good news! You can purchase DEWALT DW735 13-Inch, Two Speed Thickness Planer with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: Too low to display    

Product Feature

• Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

Product Description

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

DW735 13-Inch Three Knife Two Speed Thickness Planer At a Glance: Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm Dual speed allows 96 or 179 cuts per inch for fine finishes Disposable, reversible knives are long lasting and easy to change 1/8-inch maximum cut depth; 6-inch depth capacity; 13-inch width capacity Three-year limited warranty, one-year free service, 90-day money-back guarantee

15 amp motor operates at 10,000 rpm. View larger.

Dual-speed gear box is ideal for dimensioning and finishing work. View larger.

Powerful 15 Amp Motor for Clean Cuts
Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.

The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.

Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Large Capacity and Easy, Accurate Depth Adjustment
This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

Fan-Assisted Chip Ejection for Dust Management
The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.

This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.

The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

The DW735 planer allows for fast, easy, one-tool knife changes.

DEWALT DW735 13-Inch, Two Speed Thickness Planer Review

This is the first planer I have ever owned or used so I don't have anything for comparison but I like it so far. Out of the box you attach the hand crank and the dust attachment and you are ready to go. There are two dust attachments one to attach a 4" hose and another (diffuser maybe?) for no hose attachment. The directions are pretty well written and easy to follow. All the adjustments and work on the unit can be done with the one included tool that drops into a holder on the top. All the controls work great and are easy to operate.First let me say again this is the first time I have ever used a planer so a lot (okay, probably all :) of the snipe I got was user error. The more boards I put through the less snipe I got. It took a little playing around with and reading to learn the correct technique for moving stock through so I did get snipe on the first bunch of passes on stock, more frequently on the end of the boards then on the front. Most of what I put through was between 3 and 6 inches wide and 2-5 feet long. I did put a couple wider ones in just to see how it handled it. On a 14in long 11in wide hard maple glue up I took off 1/16th per pass and got no snipe or tearout. Then I put through a 10in wide 4ft long oak board and did get snipe on the end but not the start. I still think it's technique because it didn't do it on every pass and when taking off 1/32 I didn't get it at all. The folding tables aren't out yet, but they will probably help even more. I'm pretty convinced once I get the proper technique down I won't get snipe anymore. I'm getting more and more snipe free boards.I can't say anything bad about the surfaces. I have had zero tearout and ultra smooth surfaces on everything I have put in no matter what I do. The most I have taken off is an 1/8in while only taking 1/32in on the longer boards. Most of the time I had it set to 1/16in. Probably 50% at 1/16, 30% at 1/8, and 20% at 1/32. I put through a pretty good mix of pine, red oak, hard maple, and ash with most of it being red oak.The crank turns easily and each turn is 1/16in. The depth stop is easy to set and is for 1/8, 1/4, 1/2, 3/4, 1, and 1 1/4. The removal scale is pretty nice as well, you put the end of the board just under the edge and turn the crank. A little pointer moves on a scale to tell you how much will be taken off. It has a little chart built in showing the max that can taken off based on board width, which is nice for me because I didn't know. The thickness scale is pretty big, easy to read, and easy to set. I only ran it with my dust collector hooked up to the 4" port, but it grabbed everything. After running all the wood through, probably about 4 hours total use, there where 3 little wood chips beside the bed and that's all - the dust collector had the rest. The thing I don't like about it is the dust attachment is right in the center above the outfeed so unless you angle the hose away to the side with an elbow or suspend it somehow it gets in the way of the stock coming out. But so far that is my only gripe. This thing is really loud but I expected that, it's the loudest tool I have. All the scales and settings where dead on right out of the box. I do wish the folding tables came bundled. Overall I'm one happy camper.Okay, I finally got the folding tables. They are very easy to assemble and align. Each corner of each table can be adjusted for height. The attachment points are spring loaded so they are also easy to take off and put back on. They do help in supporting the work and seem very solid. The front table folds up out of the way and stays there. The rear table however is another story. Because the main table and the back of the moter/blade assembly are pretty much even and the pin to hold the table is set back the rear table will never fold up and stay. When the depth of cut is set around an inch and the cord is wrapped around the cord holder the rear table won't flip up more then around 20 degrees. In my opinion this is a major design flaw, the main table needs to stick out at the rear by at least an inch or two to allow the table to fold up. Help other customers find the most helpful reviews Was this review helpful to you? Yes No Report abuse | PermalinkComment�Comment

Most of the consumer Reviews tell that the "DEWALT DW735 13-Inch, Two Speed Thickness Planer" are high quality item. You can read each testimony from consumers to find out cons and pros from DEWALT DW735 13-Inch, Two Speed Thickness Planer ...